Here are some pictures of my Twin Reverb

 

 


1. Here is the speaker cabinet minus the chassis.
The application of some Son-of-a-Gun revitalized the Tolex.
Cabinet construction is finger jointed solid pine with a particle board baffle.



2. Here is a close-up of the Fender logo.
A Twin Reverb from the sixties would have a tail underlining it.




3. Here is a rear view showing the two 12 inch "Fender Special Design Speakers".
These are Oxford's.
They sound pretty good for Oxford's.



 

4. Here is a close-up of the speaker and the tube chart.




5. Here is a close-up of the tube chart.




6. Here is the new back panel I made from a piece of 1/4" plywood.
I used the old broken one as a template, and reinstalled the original
Tolex on the new back panel.




7. Here is the chassis on the "workbench".




8. Here is a view of the chassis from above. This is stripboard construction,
the next best thing to true point-to-point.
It's easy to remove components and replace them compared to a printed circuit board.




9. Here is another view showing the power tubes and preamp tubes.




10. Here is a close-up of the power tubes.
These are Svetlana 6L6GC's.



 

11. Here is the amp all together again
and in good working order.
Notice the new vintage style footswitch.



This amp was manufactured in Fullerton, CA.
In the United States of America.


Back to Twin Reverb Page